Automatically adjusts the pressure according to body weight
  1. Easy & simple design to use
  2. Very quiet
  3. Notification function

Mode explanation
Hardness setting
Enables the adjustment of pressure over 3 stages of LOW, MID, and HI to suit sleeping comfort or preference.
Static mode
All air cells are filled with air, and the body is supported by a fixed pressure, even under environments to maintain a postoperative resting state.
Alternating mode
3-system alternation. Undulates with a 150-second cycle.
Rehabilitation mode
Raises the pressure within the mattress to prevent unnecessary sinking and creates an environment that allows movement even when on the mattress.
Head up mode
Hardens portions of the mattress to prevent the body from sliding against the air cells and bottoming out during back-raising.
Ventilation mode
Blows air within the mattress to lower the humidity during use.
Other functions
Key lock release
If no functions are operated within 1 minute from when the power is switched on, the device goes into key lock mode automatically.
This button releases the key lock and enables button operation.
Alarm stop
This button mutes the warning sound and switches off the warning LED.
Notification functions
Air-leak detection
In the event that a mattress air-leak is detected, the warning sound and LED indicate an error.
Power-cut countermeasures
The warning sound and LED indicate that the power supply has stopped.
Even if the restoration of power takes some time, air leakage from the air mattress is prevented for 72 hours.
Battery-replacement notification function
When the installed emergency-power battery is near the end of its lifespan, the LED flashes.
CPR During an emergency, air is exhausted from the mattress within 10 seconds